cancel
Showing results for 
Search instead for 
Did you mean: 

Setting up your HughesNet Voice?

Highlighted
Moderator

Setting up your HughesNet Voice?

If you've purchased the HughesNet Voice service or have received a replacement ATA, don't forget to check your box for the start up guide so you can start making calls today!

We've also provided you with the latest start up guides online. 

In your browser, go to http://voice.hughesnet.com/activate

Click on the picture of the ATA you've received.


24317-am1u73.png
On this page for Cisco ATAs, at number 1 below, you can find a video demonstration on how to correctly set up your ATA. We recommend watching this first!

Number 2 and 3 are clickable links to our latest guides for setting up the equipment and for activating your ATA.

Number 4 is the link to the activation page, which you should visit once you've successfully set up your ATA.

9059-a5z1o4.png


If you have an Innomedia ATA, your page will look almost identical and will have the same appropriate guides to help you get started:


24317-1g34b2r.png
For both ATAs you will end up activating on this page if you click that button under number 4; just follow the instructions:

14673-yjo56f.png

If you have any concerns, you can always call us at 866.347.3292 for live help or you can start your own thread here in the community to get assistance. 

To start your own thread, scroll up and click on the New Post button and include your HughesNet modem's serial number located on the bottom so we can locate your account and get started. Please be detailed with your concern so we can best assist you.

 

 

 

 

 

 

 

0 REPLIES 0